WAVE setting not saved - DMG (Unlimited) - FL Studio 12.5

Post your bug reports/problems here

Moderators: eric_telemaque, davidv, seb@plogue

freeo
Posts: 4
Joined: Sat Sep 02, 2017 3:54 am

WAVE setting not saved - DMG (Unlimited) - FL Studio 12.5

Postby freeo » Sat Sep 02, 2017 9:07 am

Whenever I load a project in FL Studio a couple of my DMG Unlimited WAVE channels are not saved - they are switched to PULSE. This happens pretty random. Some channels are consistently affected by this. Sometimes they stay on WAVE. Happens across all my project files.

This is extremely annoying... First thing I have to do is go through ALL my WAVE instruments to check if they are still set to WAVE! But sometimes I forget, ruined many render -> deploy to other device -> rehearse cycles.

Tested with:
FL Studio 12.5
FL Studio 12.4
and older FL Studio versions, don't remember when I first spotted this.
Chipsounds 1.877

davidv
Site Admin
Posts: 1567
Joined: Tue Mar 02, 2004 7:23 pm
Contact:

Re: WAVE setting not saved - DMG (Unlimited) - FL Studio 12.5

Postby davidv » Tue Sep 05, 2017 9:15 am

Wondering if FL sends program change=0 or NOTE On 0 upon start. This might explain this.
Would need to investigate.
David Viens,
Plogue Art et Technologie Inc. Montreal.
http://www.plogue.com

davidv
Site Admin
Posts: 1567
Joined: Tue Mar 02, 2004 7:23 pm
Contact:

Re: WAVE setting not saved - DMG (Unlimited) - FL Studio 12.5

Postby davidv » Tue Sep 05, 2017 9:27 am

davidv wrote:Wondering if FL sends program change=0 or NOTE On 0 upon start. This might explain this.
Would need to investigate.


To test the former (and probably most logical explanation). If you do not use program changes, you can try by removing the Program Changes to KS logic, by editing {install dir}/programs/pc2ks.sfz and clearing everything out in there?
David Viens,

Plogue Art et Technologie Inc. Montreal.

http://www.plogue.com

freeo
Posts: 4
Joined: Sat Sep 02, 2017 3:54 am

Re: WAVE setting not saved - DMG (Unlimited) - FL Studio 12.5

Postby freeo » Fri Sep 08, 2017 2:06 pm

I've renamed the file pc2ks.sfz and started one of the affected project files, see attached screenshot.
Attachments
error chipsounds.png
error chipsounds.png (324.5 KiB) Viewed 372 times

davidv
Site Admin
Posts: 1567
Joined: Tue Mar 02, 2004 7:23 pm
Contact:

Re: WAVE setting not saved - DMG (Unlimited) - FL Studio 12.5

Postby davidv » Fri Sep 08, 2017 2:46 pm

freeo wrote:I've renamed the file pc2ks.sfz and started one of the affected project files, see attached screenshot.


Hi
You need to edit the file and remove what is in it, not remove/rename the file itself.
Cheers
David Viens,

Plogue Art et Technologie Inc. Montreal.

http://www.plogue.com

freeo
Posts: 4
Joined: Sat Sep 02, 2017 3:54 am

Re: WAVE setting not saved - DMG (Unlimited) - FL Studio 12.5

Postby freeo » Sat Sep 09, 2017 4:41 am

Progress!

Opening the old project 1st time: still Pulse. I've set to Wave and resaved, then opened again: It remained at Wave!

These were the lines I've commented out (nothing else was in the file previously):

Code: Select all

// <midi>
// type=com.Plogue.Aria.MIDI.Prog2KS
// vendor_specific=$SW_LOKEY|$SW_HIKEY

freeo
Posts: 4
Joined: Sat Sep 02, 2017 3:54 am

Re: WAVE setting not saved - DMG (Unlimited) - FL Studio 12.5

Postby freeo » Sat Sep 09, 2017 6:59 am

UPDATE: Not resolved. Just started a new project, worked for quite a while, closed. Reopened. Pulse again... However, it doesn't seem to happen as consistent as before, as my previous project files are ok for now.


Return to “chipsounds Bugs and Problems”

Who is online

Users browsing this forum: No registered users and 2 guests