Discrete Building Blocks

Post your groups/layouts here

Moderators: davidv, seb@plogue

jersmi
Posts: 3412
Joined: Tue Apr 19, 2005 4:18 pm
Location: Oakland, California

Re: Discrete Building Blocks

Postby jersmi » Sat Jan 31, 2015 5:01 pm

Awesome....

Is it me, it appears that the discrete Trigger does not work with sync/start of each measure setting?

dts350z
Posts: 1521
Joined: Thu Jan 15, 2009 1:18 pm

Re: Discrete Building Blocks

Postby dts350z » Sat Jan 31, 2015 5:13 pm

I don't know as I don't use tempo etc.

I suggest you test with the native discrete trigger, and a discrete monitor (the "monitor", not the value display) as my "discrete trigger 2" is built on the native one.

jersmi
Posts: 3412
Joined: Tue Apr 19, 2005 4:18 pm
Location: Oakland, California

Re: Discrete Building Blocks

Postby jersmi » Sat Jan 31, 2015 6:13 pm

Well, regular trigger works, appears discrete does not (built-in or your trigger 2), using the discrete monitor terminal.

(How can you build a counter without considering a tempo/timebase?)

dts350z
Posts: 1521
Joined: Thu Jan 15, 2009 1:18 pm

Re: Discrete Building Blocks

Postby dts350z » Sat Jan 31, 2015 6:57 pm

Well you should post a bug report.

For the counter and accumulator/counter, I'm using the native counter bidule, which has samples as a time base.

I'm designing my accumulator/counter so it can use either count every x samples OR count triggers (my discrete trigger 2). So far it has a start (inclusive) and end (inclusive) and an amount to accumulate each count, and a count reset. No reverse or loop, or other than += accum types yet.

Also you can screw things up (go out of bounds on the high end or not start at the right place at the low end) by fiddling with the amount to accumulate.

I'm approaching 1% DSP so maybe a waste of time? It's using more DSP than some of my counter groups that use audio signals so I guess yeah, I should stop working on it.

jersmi
Posts: 3412
Joined: Tue Apr 19, 2005 4:18 pm
Location: Oakland, California

Re: Discrete Building Blocks

Postby jersmi » Sat Jan 31, 2015 9:14 pm

Yeah, I try not to post bug reports until I'm sure it's not my error.

On the discrete Counter, I appreciate your efforts.

Question: this might be naive or covered elsewhere already -- how about using feedback to create a counter?
This setup is for some reason difficult to get started and keep running (a few processing off/on's to get it going for me), but it seems to work, though it does not work with your Trigger 2 for some reason. And I can't get a setup with a "clear" trigger to work at all, like I would in the pic with the audio bidules.

Screen Shot 2015-01-31 at 5.55.26 PM.png
discrete
Screen Shot 2015-01-31 at 5.55.26 PM.png (16.15 KiB) Viewed 2115 times


Screen Shot 2015-01-31 at 6.09.56 PM.png
audio
Screen Shot 2015-01-31 at 6.09.56 PM.png (19.78 KiB) Viewed 2115 times


Return to “Bidule Layouts”

Who is online

Users browsing this forum: No registered users and 1 guest